Razor-cut scythe left-handed version 70 cm
Over 10 available
€76.80
Much is different than usual with this scythe: Mowing is done from left to right.
The scythe was specially developed to enable counter-mowing in the same direction as with conventional scythes and to make special mowing situations easier to handle. It is suitable for both right- and left-handed users.
The scythe model corresponds to the "Upper Austrian country scythe".
When ordered including a sneath, our wooden sneath is specially modified for left-hand grips.
| Lenght: | 70 cm |
|---|
Similar products
This scythe model was found in the depths of an old scythe warehouse. Outstanding is the specially shaped back. The scythe is very sturdy, making it suitable for tall, thick grass and also for cutting grain. The association has had this special scythe model manufactured again.
Heavy-duty scythe model with a flat tip for clearing forest cultures, bushes, and paths. The scythe is extremely sturdy and particularly designed for mowing tasks involving tall, hard grass, small bushes, and young trees up to a maximum diameter of 0.5 cm. The scythe blade is triple-peened. An adjustment and assembly manual is included in the scope of delivery.
The strongly curved shape of the 40 cm clearing scythe makes mowing in confined spaces easier. The scythe resembles a post horn, hence the name. It is particularly stable, allowing thin trees and bushes to be mown with it. A draw-knife can optionally be mounted on the sneath (snath), allowing heavier woody growth to be cut down. Its primary use is in clearing and mowing young trees in forest cultures, hence its secondary name: forest scythe with billhook. The scythe blade is triple-peened.
Coarse abrasive rubber 20 x 50 x 80 mm Ideal tool for removing varnish from the cutting edge before first use. The rubber-bonded abrasive grains also clean the cutting edge perfectly before subsequent peening. Due to the matte metal surface left after sanding, hammer strikes during peening are clearly visible.
This hard steel scythe (Mayer model) is a pure competition scythe. The scythe edge is 3-fold peened. The 90 cm scythe fits the curved wooden sneath from our range, while the 130 cm scythe requires a special sneath.
The curved wooden sneath (also called snath, snead, scythe handle, or scythe tree) is available in five sizes. It is made of high-quality ash wood and ergonomically shaped. Even after extended mowing, the wooden sneath sits comfortably in the hand. The matching wooden sneath is chosen according to body height. The handles of the scythe sneath can be adjusted to individual needs via the pre-drilled holes. Every scythe from our assortment fits this wooden sneath, with the exception of the 130 cm competition scythe. Included in the scope of delivery are a scythe ring, wrench, wooden wedge, as well as a detailed assembly and adjustment manual. ATTENTION: The latest model is designed with an advanced scythe ring without a plastic damper. Further information on this can be found in the supplementary sheet included in the assembly and adjustment manual.
Serves for adjusting the inclination angle of the scythe on the wooden sneath. Scope of delivery: Special scythe ring (inner dimensions: H 45 mm x W 30/39 mm), wrench, wooden wedge, socket head cap screws (M 12 x 1.75). Attention: The special scythe ring including accessories is already included in the scope of delivery of the wooden sneath!
The draw-knife serves as an addition for meadow, weed, and clearing scythes as well as the "Posthorn" clearing scythe to be able to cut heavier woody growth as well. Assembly instructions: The draw-knife is mounted between the sneath and the scythe (see picture).
For small and tight spots, for fresh and old grass. Lightweight scythe model with a stone point for clearing hiking trails and slopes. This agile scythe is very short and therefore ideal for working in confined spaces. An adjustment and assembly manual is included in the scope of delivery!
Die erste Grassense aus dem Hause Falci die speziell nach den Vorgaben des Sensenvereins gefertigt wird. Die Sense ist ideal für junges bis mittelaltes Gras. Sie zeichnet sich durch ihren geraden Schneidenverlauf und leichtes Gewicht aus. Im Lieferumfang ist eine Einstell- und Montageanleitung inkludiert.
The hard steel scythe is an all-around scythe and represents a lightweight alternative to the red meadow, weed, and culture scythe. The advantage of this scythe is that it stays sharp longer due to the hard steel. A disadvantage is that it is harder to peen. However, this can be avoided by carefully (!) grinding the scythe with a flap disc.
Long replacement wooden handle (right hand), for adjustable wooden sneath.
Customers also bought
A whetstone holder should always be kept close at hand when scythe mowing. It is simply worn on the belt or waistband and filled with a little water. This whetstone holder is made of plastic and comes with a metal belt hook. Thanks to its yellow color, it is easy to find at any time.
A stone for sharpening very fine scythe, sickle, and knife edges. Sharpening the scythe blade during mowing is carried out as soon as the sharpness decreases and is a basic prerequisite for effortless mowing. The very fine grain is ideal for sharpening scythes with a fine edge, as it sharpens effectively while preserving the thin peened edge for a long time. The sedimentary sandstone from the Malá Fatra mountains in Slovakia features a fine, uniform grain and very high wear resistance. Each whetstone should be moistened with water before use to allow the grain to work optimally.
Important: Only select this service for scythes with a length of 35cm to 75cm! Essentially, all scythes we sell are pre-peened by machine multiple times and coated with anti-rust lacquer. With this optional service, the scythe becomes even sharper and is particularly well-suited for young and green grass. We perform the following work steps: The anti-rust lacquer is removed from the cutting edge area by grinding. The cutting edge is professionally and uniformly thin-peened by hand. Even if new scythe blades are labeled "ready to mow" (whether ours or from other brands), they only truly become ready after the anti-rust lacquer has been removed.